Eico - Alterior Satin
Eico Alterior Satin is a high quality waterbased paint which is manufactured using 100% pure acrylics*. It dries to a non yellowing flat finish and has excellent colour retention properties. Eico alterior satin is easy to use, had a high opacity and will even adhere to aged alkyd (oil based) paints. It is an environmentally friendly product which APEO free and gives off very little odour.
Areas of Use
Interior and exterior: Walls, ceilings, roof tiles and primed structural steel.
Substrates: Concrete, masonry, cements, rendering plaster, plasterboard, lining paper, glass fibre, woodwork (primed), etc.
Ensure Surfaces are stable, firm and free from contaminants. On rough surfaces, you can dilute the paint with upto 10% clean water. Air temperature should be over 5º C, preferably above 10º C and relative humidity below 85% above, during application and drying. Temperature of surface should be between 5 and 35º C.
- Gloss level: 30 (satin)
- Coverage: 8-10m²/Litre
- Volume Solid: 38%
- Recoating time: Min. 8 – 10 hours
- Solvent: Fresh Water
- Cleaning of tools: Water
- Drying time: 2 – 3 hours (touch dry). (Depending upon temperature and relative humidity).
Technical Data Sheet (opens in new tab)
Safety Material Datasheet (opens in new tab)
*100% pure acrylic produces a superior quality paint. Even though it requires large amounts of energy to create pure acrylic, Eico paints are produced in a factory where the energy comes from 100 per cent free geothermal and hydro-power energy. This means that not only can they control costs, but also the manufacturing process is carbon neutral.