Eico - Alterior Gloss
Eico Gloss Paint is a high quality interior and exterior water based gloss paint made from 100% pure acrylics*. The non-yellowing, gloss finish has excellent colour retention and fantastic covering properties. Great for a wide range of surfaces and suitable for use in bathrooms and other areas where resistance to humidity is particularly important.
Eico alterior gloss paint is an environmentally friendly product with very little odour, APEO and solvent free with low VOC rating (VOC ≤ 2.5%). EU limit for this product (Cat A/d): 130g/ltr (2007)/130g/ltr (2010). This product contains max 36g/litre VOC measured at 250ºC.
Areas of Use
Interior and exterior: Walls, ceilings, roof tiles and radiators. When using on radiators, they must be first primed with Ican Grepp V Primer Sealer.
Substrates: Concrete, masonry, lime, cements, rendering plaster, plaster board, lining paper, glass fibre, woodwork and steel (primed), etc.
The surface to be painted should be stable and free from dust and contaminants. On rough surface it may be necessary to dilute the paint by about 10% with fresh water.
Application and drying should take place when temperature is above 7°C, preferably above 10°C and relative humidity below 80%. Temperature of surface should be 7 to 35°C.
- Gloss level: 85 (Gloss)
- Coverage: 8 – 10 m2 /Litre.Volume
- Solid: 38%
- Recoating time: Min. 8 – 10 hours
- Solvent: Fresh Water
- Cleaning of tools: Water
- Drying time: 2 – 3 hours (touch dry) (Depending on temperature and humidity).
Technical Data Sheet (opens in new tab)
Safety Material Datasheet (opens in new tab)
*100% pure acrylic produces a superior quality paint. Even though it requires large amounts of energy to create pure acrylic, Eico paints are produced in a factory where the energy comes from 100 per cent free geothermal and hydro-power energy. This means that not only can they control costs, but also the manufacturing process is carbon neutral.