Slimline Water Butt
The Norway is a slimline water butt modelled on wooden shingles. Stylish and yet compact and space saving.
The Norway's flat surfaces make it ideal for standing it against walls, sheds, etc. As shown in the pictures, its square, flat-line design is supported with modelling at the rear to allow for the internal water pressure loads.
As the Norway is a sealed tank, i.e. the internals cannot be accessed for cleaning, we recommend the Filter Collector with Push Fit Connection for Sealed Tanks to connect this water butt to your downpipe. Available in a colour to match your downpipe.
The flat water butt has a width of 60cm, a depth 40cm and a maximum height of 1.3m.
Add a Downpipe Diverter / Filter / Overflow (3 in one)
The 3P Filter Collector with Push-Fit connector Kit for Sealed Tanks (see options above) is specifically designed for enclosed water butts like the Tower. The Tower is a completely sealed tank; therefore, traditional tank connectors that require access inside the water butt to tighten a backnut will not work.
This Filter with connector kit includes a specially engineered push-fit grommet that is simply inserted into the drilled hole (drill supplied), creating a secure, watertight seal without needing to reach inside the tank. It provides a quick, reliable installation while allowing you to enjoy all the benefits of the premium 3P Filter Collector, including efficient leaf filtration and automatic overflow protection.
It is available in Black, Brown and Grey to suit the colour of your downpipe.
Technical Information
- Capacity - 230 Litre water butt
- Dimensions - Height: 130cm, Width: 60cm, Depth: 40cm
- Made from high-quality polyethylene
- Connection Points - 3 x ¾" BSP brass threaded ports as; 1 x tap point for watering can & 2 x interconnection or drain down point at base
- Recommended rainwater diverter - 3P Filter Collector with Push-Fit connector Kit for Sealed Tanks. If you need the water butt to be installed further away from your downpipe we recommend also purchasing a Push-Fit Long Link Kit which is available in lengths of 1m to 5m - Contact us.
Winter Care Precautions
During extremely cold winters, when daytime temperatures are below zero for several days, it is wise to ensure that the tank is only about 2/3rd's full and the water supply is turned off. This will prevent the frozen water from expanding and damaging the tank.
Accessories
Supplied with an accessory and fitting kit which includes:
- Brass ¾" Tap,
- Wall Fixing Bracket & Screws
- Installation Instructions
Further Information
Norway Installation Instructions (pdf opens in new window).
Note: Colours shown on this website are for guidance only. Actual product colours may vary slightly due to differences in screen settings, display devices, lighting conditions, and other environmental factors.
Guides and ideas
A bit undecided about what options are available to you?
Then have a look at our Rainwater Harvesting FAQs and have a read of our informative guides
