Additional Information

Site Information

 Loading... Please wait...
  • Ultramarine Blue Limewash 5% Dilution
  • Pot sizes - Ultramarine Blue pigment

Limewash Pigments - Ultramarine Blue

£17.68  Price includes VAT


Product Description

Ultramarine Blue is a manufactured blue powdered pigment suitable for use as a tint for limewash.

Please note: Limewash tinted with ultramarine blue should be used immediately once mixed as it will fade if stored in a wet state. Once the limewash is dry, the colour will become lime stable. Also note that limewash tinted with ultramarine blue is not UV stable so it is recommended for internal use only.

Please be aware that due to the nature of limewash, pigmented washes will dry lighter than the initial mixed colour. We recommend that tests are carried out before final application.

  • Manufactured Pigment On A Natural Base
  • Not UV Stable
  • Lime And Cement Colour Stable
  • Non-Toxic

The volume stated is approximate, for consistency we measure our pigments by weight. 
The weights measured for each volume for Ultramarine Blue (284) are as follows:

  • 250ml – 130g
  • 1 Litre – 520g
  • 10 Litres –5.2kg


Mixing the dry powder pigment with warm water to create a slurry will help to ensure that the pigment is fully saturated before adding it to the limewash. This will help to avoid colour bursts in the finish caused by dry pockets of pigment. Simply add the pigment slurry to the limewash and mix well.

Quantity Guide

1 x 25kg Tub of our Mature lime putty mixed with approximately 25 litres of water will make approximately 45 litres of Limewash*. No more than 2 litres of dry pigment (5% by volume) should be added to this quantity of limewash to avoid compromising the strength of the limewash.

The depth of colour in the picture above was achieved by adding the maximum quantity of pigment (5% by volume) to a limewash mix which had the consistency of single cream.

Adding smaller amounts of pigment will achieve lighter shades.

Any of the dry pigments in our limewash range can be mixed together to create a wide range of custom colours.

*Lime putty can vary in density, adjust the volume of water accordingly. Limewash should have a runny consistency somewhere between milk and single cream. Thicker limewash mixes are prone to cracking.


10 litres of Limewash will cover approximately 30-40 m2 per coat. 3-5 coats are recommended for the first application.

Coverage is dependent on mix consistency and substrate being painted. 


See our infographic making and colouring limewash.



Please note, pigment images are for guidance only. Different computer screens and printers can greatly influence the perceived colour. Please carry out tests before final application.

Find Similar Products by Category

Customers also viewed

Related Products

Click the button below to add the Limewash Pigments - Ultramarine Blue to your wish list.