Lime Green Solo is a one coat lime plaster suitable for interior use on masonry and boards. Solo Onecoat plaster can be finished to a smooth finish, suitable for decoration.
- High quality finish
- Minimum waiting time
- High vapour permeability
- Labour and time saving
- Suitable for a wide range of substrates including plasterboard
- Suitable for finishing woodfibre insulation
- Easy to mix - just add water
Discounts
Enjoy our site wide discount on sales over £500 which are additionally applied on top of bulk buy discounts listed on the product selection.
Coverage
Approximate coverage rates at different thicknesses per bag:
- 5m² at 3mm
- 1.88m² at 8mm
- 1.5m² at 10mm
- 1.25m² at 12mm
Required Thicknesses:
- Insulation boards typically 8 to 12mm
- Plaster boards typically 3 to 5mm
- Masonry typically 10-12mm
Preparation
- Ensure surfaces to be plastered are clean and free of dust and loose particles.
- Dampen porous backgrounds before application
- Do not prime walls with PVA
Mixing
- In a large bucket mix the plaster with clean water for 3-5minutes. Mix by hand or with a paddle mixer. You will need 5-7 litres of water per 25kg bag of Solo Onecoat.
Application
Do not apply in temperatures below 5°C or above 30°C.
On Masonry - Apply in one pass and level with a straight edge. After approx. 1.5 hours sponge float the surface to a light creamy texture. After a few more minutes it is possible to produce a smooth finish with a steel trowel. Be careful not to overwork the surface which can lead to fire cracking.
On boards and wood Fibre Insulation - Apply the limegreen Solo Onecoat plaster in 2 passes with no more than an hour in between. Apply a mesh into the first coat to protect against movement cracks. Finish as above.
Do not allow Lime green one coat plaster to dry quickly; dampen very dry and porous backgrounds and do not force dry.
Painting
Allow at least 2 weeks for the plaster to dry before finishing with a breathable paint.
Further Information
New content loaded
