Contact Us

  • Celtic Sustainables
  • 01239 777009
  • Unit 3 Parc Teifi Cardigan Ceredigion SA43 1EW

Information

About us

Put something nice about your company here...

Skip to main content
Free delivery icon
Free delivery icon
Free delivery icon

DAB Divertron 900X with Float Switch

£510.00 Including VAT
£425.00 (Ex. VAT)
£510.00 Including VAT
£425.00 (Ex. VAT)
Adding to cart… The item has been added

Brand: DAB

SKU:
IR10136F
UPC:
8013415010740

DAB Divertron 900x submersible pump with Float Switch

A high quality multi-stage DAB submersible pump, the Divertron 900x (also referred to as Leader Divertron 900x) is equipped with 4 impellers and electronic flow control which automatically stops and starts the pump as needed. Automation is controlled by an increase or decrease in pressure in the system, for example, when a tap  is turned on causing the water pressure to drop, the pump automatically turns on. When the tap is turned off again and the pressure resumes, the pump automatically turns off.

The 900x is designed for pumping clean water only. Any abrasives/solids present in the water will damage the impeller and the internal non return valve (NRV) so, when pumping rainwater or similar, it's highly recommended to use a pre-tank filter to help prevent this.  

Manufactured from anti-corrosive and rust-proof materials and with a wear resistant shaft, the 900x is totally waterproof and suitable for use both indoors and out.

It's cooled by the water around it, making it a quiet pump when operating but because of this, the 900x must always be fully submerged when in use, to prevent it from overheating. This model is supplied with an integrated Float Switch to stop the pump automatically, whenever the surrounding water level drops below the minimum required for sufficient cooling. 

As with all the Divertron models, the 1200x should never sit directly on the base of the tank unless a Floating Intake is fitted. This should be kept within 15° of vertical to prevent any sediment from entering the pump. Where a floating intake is not possible or desired, an alternative is to attach a mesh strainer to the pump inlet and suspend the pump at least 20cm above the base of the tank with a suitable lifting cable (not supplied).   

A Pressure Vessel is highly recommended with these pumps. Fitted to the water delivery pipework (i.e. after the pump) pressure vessels act as a buffer which reduces unnecessary stop/start activity on the pump caused by leaks. This improves the energy efficiency of the pump and ultimately helps increase its lifespan. More information about Pressure Vessels can be found on our Pressure Vessel page under how Pressure Vessels work.

Recommended Uses

  • Domestic water boosting
  • Rainwater harvesting
  • Surface irrigation
  • Tank transfer (see QuickStop Valves too to save energy)
  • Above ground tanks
  • Garden water butt and larger types
  • Submersed surface and underground installation.

Technical Information

Divertron 900 x

  • Pumped liquid: Clean cold water without abrasives or solids.
  • Max flow: 105l/min (6.3m3 per hour).
  • Max Head: 45m
  • Inlet Size: 1"
  • Outlet Size: 1" (supplied as standard with a multi-hosetail reducer)
  • Dimensions: 160mm deep x 160mm wide x 536mm high (not including multi-hosetail connector)
  • Weight: 11Kg
  • Waterproof protection rating: IP68
  • Liquid temperature range: +0°C to +40°C
  • Maximum depth: 12m (39ft).
  • Cable Length: 15m H07RNF with 2-pin (Schuko) plug.
  • CE Mark

Please note: All Divertrons are fitted with a 2-pin (Schuko) plug. We strongly recommend that all submersible pumps are installed on a 10A single fused spur and should be installed by a qualified electrician. If you need an automatic pump with a 3-pin plug, please look at the SteelPumps range.

 Float Switch

  • Cable Material: H07RN-F 3X1
  • Cable Length: 2m (contact us for other lengths)
  • Model Type: K04-10
  • Approval: ENEC / EC
  • Microswitch Features: 10(4)A 250V
  • Operating Temperature: 0oC to 50oC
  • Protection Rating: IP68
  • Switch Angles: +45o/-45o
  • Float Dimensions: 81 x 131 x 41.5mm
  • Float Weight: 154g
  • Float Volume: 244cm3
  • Max Depth: 1 bar
  • Float Housing Material: Non-toxic polypropylene (PP), Colouring: Non-toxic, Blue and Yellow or Blue and Red

 3-Way Cable Joiner

  • Cable Entries: 2
  • Number of Poles: 3
  • Terminal Type: Screw - end barrier contact
  • Body Material: PA66/TPE
  • IP Rating: IP68
  • Max Conductor Size: 4mm2
  • Max Current: 32A
  • Max Voltage: 450
  • Temp Rating: -40oC to 125oC
  • Minimum Cable Diameter: 5mm
  • Maximum Cable Diameter: 13mm
  • Temperature "T" Rating: T85

 


Documentation & FAQs

DAB Divertron FAQs and Troubleshooting Guide


Guides and ideas

A bit undecided about what options are available to you?

Take a look at our Rainwater Harvesting FAQs and have a read of our informative guides or else drop us an email.