Divertron 1200 Mesh Intake
DAB Divertron 1200 MESH submersible pump
The DAB Divertron 1200M also known as a Leader Divertron 1200 is a high quality 1HP multi-stage DAB submersible pump with 4 impellers and electronic flow control (i.e. the pump will automatically pump on demand). The electronic flow control of the DAB Divertron 1000 pump responds to the pressure in the outlet delivery pipe. As the user draws water by opening a tap or similar, the pump starts automatically. When you turn the water demand off, the pump cuts out automatically. It is manufactured with anti-corrosive and rust-proof materials. The motor has thermal overload protection and has 1" threaded outlet.
The Divertron 1200 MESH DAB submersible pump has a wear resistant shaft, and the excellent water-cooling of the motor allows the pump to operate when fully submerged. Being cooled by the waterbody that the pump is immersed it is quiet in operation.
Supplied with a 15 metre power cable with plug, 2-pin (Schuko) plug and internal non return valve.
The Divertron 1200M is designed for pumping clean water only. The impeller will be damaged if abrasives and solids are run through it. The DAB Divertron 1200 comes with an integral stainless steel mesh strainer to prevent large particles from entering the pump housing, ensuring a longer life.
See the technical information for more information on output and the Divertron flow curves. A pressure vessel will help prevent false re-starts due to small pressure leaks.
It is very safe in an outside submerged application, as the pump is totally water proof (to IP68) This makes it especially safe where children are around - for total peace of mind.
- Rainwater harvesting tanks and systems
- Surface irrigation systems
- Tank to tank transfer applications (see QuickStop Valves to save energy and pump wear)
- Above ground tanks in wash down systems
- Large garden water butt or rain tanks (over 1000 litres)
- Submerged surface and underground installations, wells and boreholes.
NOTE: The Divertron 1200M Submersible pumps by DAB are all wet tested for proper functioning. The Divertron pumps MUST NOT sit on the floor of any water tank (they can be suspended using a suitable lifting cable (not supplied) and MUST be kept within 15o of vertical. They must be run submerged. If run out of the water the motor cannot cool properly. Where using in a Rainwater Harvesting (RWH) tank or shallow tanks where operation may take place in low water level conditions for extended periods, the SteelPumps are worth considering. The SteelPumps can run out of the water, or submerged (to max of 5 m submergence depth). If in any doubt, contact us by email for advice.
Customers also viewed
£288.00 (inc VAT) £240.00 (ex VAT)
£264.00 (inc VAT) £220.00 (ex VAT)
£35.00 (inc VAT) £29.17 (ex VAT)
£359.86 (inc VAT) £299.88 (ex VAT)