Celtic Sustainables Shop

LIME RIGHT 350 Moderate is by far Eco Right's biggest seller and is often seen as the panacea for building with lime. LIME RIGHT 350 is widely used as a plaster, render and mortar.

The mortar is exceptionally easy to use and the amount of aggregate provides an outstanding finish for mortars and render where aesthetic is important.

LIME RIGHT 350 is often used as a finish coat plaster where a more rustic feel is required, however due to the aggregate content, where a smooth finish is required, particularly on eco builds or renovations, LIME RIGHT finish plaster is used as a skim coat.

LIME RIGHT sets over a period of 15 to 20 days, but like all lime building products continues to grow in strength over a much longer period. The product remains workable for up to 12 hours after being knocked up.

LIME RIGHT 500 Eminent is a very hard durable mortar used where high strength and fast setting is required: Typical applications include footings (all work below DPC), gable ends, chimney stacks, exposed brick work and any area which is likely to be subject to inclement weather conditions. This product maybe used as a mortar, render or plaster.

Natural Hydraulic Lime 3.5 moderate strength can be used for a wide range of applications for jointing mortars, bedding tiles, renders and plasters.

Eco Right NHL 3.5 has excellent resistance to sulphates in either ground waters or in masonry. NHL 3.5 also has good resistance to freezing  and thawing actions with 1:2 1/2. and 1:2 Lime: Sand ratio.

Natural Hydraulic Lime 5 Eminent strength can be used for a wide range of applications for jointing mortars, bedding tiles, renders and plasters.

Eco Right NHL 5 has excellent resistance to sulphates in either ground waters or in masonry. NHL 5 also has good resistance to freezing  and thawing actions with 1:2 1/2. and 1:2 Lime: Sand ratio.

For those who wish to mix their own non-hydraulic mortars, repair the finest of cracks, or whom perhaps wish to make their own lime wash Eco Right Lime Putty provides the answer. For the inexperienced however it is advisable to use our ready mixed Coarse and Fine Stuff to ensure the consistency and quality  of the end product. If you are looking for advice as to how best produce a mortar of your own specification please feel free to contact us for advice.

Eco right Lime Putty is a high calcium non hydraulic lime, slaked and sieved at our production facility and then matured for in excess of 3 months. We use the finest Buxton quicklime, and this same product is tested by Buxton Lime to the European  EN459-2-2001 standard.

Eco Right Coarse Stuff is a 3 to 1 mix of selected sharp and builders sands plus sieved slaked Buxton quicklime (lime putty). The quicklime is slaked by Eco Right at our production facility and matured for in excess of 3 months prior to blending.

Coarse stuff can be used for plastering, rendering, bricklaying and pointing. The blend dries to a beautiful buff/cream finish and the aggregate content is perfect for period properties. Gentle stippling of the mortar prior to its drying reveals the aggregate and provides a stunning finish for mortar or render.

Coarse stuff is commonly used as the backing coats in three coat plastering work, with Fine Stuff being used to provide the perfect finish. Often, however, a rough coarse finish is required and the coarse stuff is left as the final coat.

Widely recognised as the best quality time finish plaster available. Eco Right Fine Stuff has been used extensively on thousands of properties  throughout the world and its reputation is well founded. Staley homes, national monuments, churches and period properties have all benefited from this superior quality fine lime plaster, which dries to a perfectly smooth and beautiful white finish.

The recipe for Eco Right Fine Stuff is a mix of 2 parts sieved soft and silver sand to one of matured sieved lime putty. As with any product it is a combination of the quality control in production and the use of high grade materials that affords a consistently excellent end result.

Eco Right Coarse Stuff is used to provide greater flexibility and strength in the dried finish product. The hair effectively bonds the plaster and as such we use horse hair approximately 11/2" long however we can supply coarse haired stuff with goat hair should it be required.

Haired Coarse Stuff should be used when working on lath and wood, it should be considered on smooth stone backgrounds.